The electronic components LVX161284A contains eight bidirectional data buffers and eleven control/status buffers to implement a full IEEE 1284 compliant interface. The device supports the IEEE 1284 standard, with the exception of output slew rate,and is intended to be used in an Extended Capabilities Port mode (ECP). The pinout allows for easy semiconductor connection from the Peripheral (A-side) to the Host (cable side).
Outputs on the cable side can be configured to be either open drain or high drive (± 14 mA) and are connected to aseparate power supply pin (VCCcable) to allow these outputs
to be driven by a higher supply voltage than the A-side. The pull-up and pull-down series termination resistance of these outputs on the cable side is optimized to
drive an external cable. In addition, all inputs (except HLH) and outputs on the cable side contain internal pull-up resistors connected to the VCCcable supply to provide proper termination and pull-ups for open drain mode.
If you are engaged in electronic component industry, recommend a professional
website,Hqew.net is a Global famous semiconductor,capacitor transaction platform,more Ic parts supply,such as lm358,lm317,ne555,lm324,lm339.
Thursday, April 21, 2011
Wednesday, April 20, 2011
DESCRIPTION about electronic component LVX273 and Industry web recommended
The semiconductor LVX273 has eight edge-triggered D-type flip-flops with
individual D inputs and Qoutputs. The common buffered Clock (CP) and Master Reset (MR)
input load and reset (clear) all flip-flops simultaneously.
The register is fully edge-triggered. The state of each Dinput, one setup time before the
LOW-to-HIGH clock transition,is transferred to the corresponding flip-flop’s Q output.
All outputs will be forced LOW independently of Clock or Data inputs by a LOW voltage
level on the MR input.
The device is useful for applications where the true output only
is required and the Clock and Master Reset are common to all storage elements. The inputs
tolerate up to 7V allowing interface of 5V systems to 3V systems.
The following information about electronic component M41T00 features from Hqew.net.
Hqew.net have plenty of cash, credible suppliers, M41T00 PDF material Hqew.net is Now the
world's largest electronic components, dedicated to one exchange site terminal suppliers
and purchasers.otehr hot model such as lm358,lm317,ne555,lm324,lm339 supply.
individual D inputs and Qoutputs. The common buffered Clock (CP) and Master Reset (MR)
input load and reset (clear) all flip-flops simultaneously.
The register is fully edge-triggered. The state of each Dinput, one setup time before the
LOW-to-HIGH clock transition,is transferred to the corresponding flip-flop’s Q output.
All outputs will be forced LOW independently of Clock or Data inputs by a LOW voltage
level on the MR input.
The device is useful for applications where the true output only
is required and the Clock and Master Reset are common to all storage elements. The inputs
tolerate up to 7V allowing interface of 5V systems to 3V systems.
The following information about electronic component M41T00 features from Hqew.net.
Hqew.net have plenty of cash, credible suppliers, M41T00 PDF material Hqew.net is Now the
world's largest electronic components, dedicated to one exchange site terminal suppliers
and purchasers.otehr hot model such as lm358,lm317,ne555,lm324,lm339 supply.
DESCRIPTION about electronic component LVX273 and Industry web recommended
The semiconductor LVX273 has eight edge-triggered D-type flip-flops with
individual D inputs and Qoutputs. The common buffered Clock (CP) and Master Reset (MR)
input load and reset (clear) all flip-flops simultaneously.
The register is fully edge-triggered. The state of each Dinput, one setup time before the
LOW-to-HIGH clock transition,is transferred to the corresponding flip-flop’s Q output.
All outputs will be forced LOW independently of Clock or Data inputs by a LOW voltage
level on the MR input.
The device is useful for applications where the true output only
is required and the Clock and Master Reset are common to all storage elements. The inputs
tolerate up to 7V allowing interface of 5V systems to 3V systems.
The following information about electronic component M41T00 features from Hqew.net.
Hqew.net have plenty of cash, credible suppliers, M41T00 PDF material Hqew.net is Now the
world's largest electronic components, dedicated to one exchange site terminal suppliers
and purchasers.otehr hot model such as lm358,lm317,ne555,lm324,lm339 supply.
individual D inputs and Qoutputs. The common buffered Clock (CP) and Master Reset (MR)
input load and reset (clear) all flip-flops simultaneously.
The register is fully edge-triggered. The state of each Dinput, one setup time before the
LOW-to-HIGH clock transition,is transferred to the corresponding flip-flop’s Q output.
All outputs will be forced LOW independently of Clock or Data inputs by a LOW voltage
level on the MR input.
The device is useful for applications where the true output only
is required and the Clock and Master Reset are common to all storage elements. The inputs
tolerate up to 7V allowing interface of 5V systems to 3V systems.
The following information about electronic component M41T00 features from Hqew.net.
Hqew.net have plenty of cash, credible suppliers, M41T00 PDF material Hqew.net is Now the
world's largest electronic components, dedicated to one exchange site terminal suppliers
and purchasers.otehr hot model such as lm358,lm317,ne555,lm324,lm339 supply.
Tuesday, April 19, 2011
Electronic components Industry recommended and model introduction
Electronic components famous enterprise is Hqew.net,many hot model such as Lm358,lm317， ne555 and so on,other 74LV74,Introduces the FEATURES about electronic components 74LV74 and electronic component lm358 details.
FEATURES
1.Wide operating voltage: 1.0 to 5.5V
2.Optimized for Low Voltage applications: 1.0 to 3.6V
3.Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V
4.Typical VOLP (output ground bounce) 0.8V @ VCC = 3.3V,
Tamb = 25°C
5.Typical VOHV (output VOH undershoot) 2V @ VCC = 3.3V,
Tamb = 25°C
6.Output capability: standard
7.ICC category: flip-flops
The electronic component LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages.
FEATURES
1.Wide operating voltage: 1.0 to 5.5V
2.Optimized for Low Voltage applications: 1.0 to 3.6V
3.Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V
4.Typical VOLP (output ground bounce) 0.8V @ VCC = 3.3V,
Tamb = 25°C
5.Typical VOHV (output VOH undershoot) 2V @ VCC = 3.3V,
Tamb = 25°C
6.Output capability: standard
7.ICC category: flip-flops
The electronic component LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages.
Thursday, April 14, 2011
Detailed info about electronic component OP1177 series
The electronic component OPx177 family consists of very high precision, single, dual, and quad amplifiers featuring extremely low offset voltage and drift, low input bias current, low noise, and low power consump-tion. Outputs are stable with capacitive loads of over 1000 pF with no external compensation. Supply current is less than 500 μA per amplifier at 30 V. Internal 500 Ω series resistors protect the inputs, allowing input signal levels several volts beyond either supply without phase reversal.
Unlike previous high voltage amplifiers with very low offset voltages, the electronic components OP1177 (single) and OP2177 (dual) amplifiers are available in tiny 8-lead surface-mount MSOP and 8-lead narrow SOIC packages. The OP4177 (quad) is available in TSSOP and 14-lead narrow SOIC packages. Moreover, specified performance in the MSOP and the TSSOP is identical to performance in the SOIC package. MSOP and TSSOP are available in tape and reel only.
The OPx177 family offers the widest specified temperature range of any high precision amplifier in surface-mount packaging. All versions are fully specified for operation from 40°C to +125°C for the most demanding operating environments.
Unlike previous high voltage amplifiers with very low offset voltages, the electronic components OP1177 (single) and OP2177 (dual) amplifiers are available in tiny 8-lead surface-mount MSOP and 8-lead narrow SOIC packages. The OP4177 (quad) is available in TSSOP and 14-lead narrow SOIC packages. Moreover, specified performance in the MSOP and the TSSOP is identical to performance in the SOIC package. MSOP and TSSOP are available in tape and reel only.
The OPx177 family offers the widest specified temperature range of any high precision amplifier in surface-mount packaging. All versions are fully specified for operation from 40°C to +125°C for the most demanding operating environments.
Detailed info about electronic component OP1177 series
The electronic component OPx177 family consists of very high precision, single, dual, and quad amplifiers featuring extremely low offset voltage and drift, low input bias current, low noise, and low power consump-tion. Outputs are stable with capacitive loads of over 1000 pF with no external compensation. Supply current is less than 500 μA per amplifier at 30 V. Internal 500 Ω series resistors protect the inputs, allowing input signal levels several volts beyond either supply without phase reversal.
Unlike previous high voltage amplifiers with very low offset voltages, the electronic components OP1177 (single) and OP2177 (dual) amplifiers are available in tiny 8-lead surface-mount MSOP and 8-lead narrow SOIC packages. The OP4177 (quad) is available in TSSOP and 14-lead narrow SOIC packages. Moreover, specified performance in the MSOP and the TSSOP is identical to performance in the SOIC package. MSOP and TSSOP are available in tape and reel only.
The OPx177 family offers the widest specified temperature range of any high precision amplifier in surface-mount packaging. All versions are fully specified for operation from 40°C to +125°C for the most demanding operating environments.
Unlike previous high voltage amplifiers with very low offset voltages, the electronic components OP1177 (single) and OP2177 (dual) amplifiers are available in tiny 8-lead surface-mount MSOP and 8-lead narrow SOIC packages. The OP4177 (quad) is available in TSSOP and 14-lead narrow SOIC packages. Moreover, specified performance in the MSOP and the TSSOP is identical to performance in the SOIC package. MSOP and TSSOP are available in tape and reel only.
The OPx177 family offers the widest specified temperature range of any high precision amplifier in surface-mount packaging. All versions are fully specified for operation from 40°C to +125°C for the most demanding operating environments.
Characteristics and DESCRIPTION about electronic components L6201
1.SUPPLY VOLTAGE UP TO 48V
2.5A MAX PEAK CURRENT (2A max. for electronic components L6201)
3.TOTAL RMS CURRENT UP TO
4.L6201: 1A; L6202: 1.5A; L6203/L6201PS: 4A
5.RDS (ON) 0.3 W (typical value at 25 °C)
6.CROSS CONDUCTION PROTECTION
7.TTL COMPATIBLE DRIVE
8.OPERATING FREQUENCY UP TO 100 KHz
9.THERMAL SHUTDOWN
10.INTERNAL LOGIC SUPPLY
11.HIGH EFFICIENCY
DESCRIPTION
The I.C. is a full bridge driver for motor control applications realized in Multipower-BCD
technology which combines isolated DMOS power transistors with CMOS and Bipolar circuits
on the same chip.
By using mixed technology it has been possible to optimize the logic circuitry and the
power stage to achieve the best possible performance. The DMOS output transistors can
operate at supply voltages up to 42V and efficiently at high switching speeds. All the
logic inputs are TTL, CMOS and mC compatible. Each channel (half-bridge) of the device is
controlled by a separate logic input, while a common enable controls both channels.
The I.C. is mounted in three different packages.
The above information from a web site Hqew.net,A professional electronic component trading
market and platform,If you are engaged in IC industry,Suggest you go to the web in search
of the information of you need material.Offer popular hot ic components model for example
lm358,lm317,ne555,lm324,lm339.
2.5A MAX PEAK CURRENT (2A max. for electronic components L6201)
3.TOTAL RMS CURRENT UP TO
4.L6201: 1A; L6202: 1.5A; L6203/L6201PS: 4A
5.RDS (ON) 0.3 W (typical value at 25 °C)
6.CROSS CONDUCTION PROTECTION
7.TTL COMPATIBLE DRIVE
8.OPERATING FREQUENCY UP TO 100 KHz
9.THERMAL SHUTDOWN
10.INTERNAL LOGIC SUPPLY
11.HIGH EFFICIENCY
DESCRIPTION
The I.C. is a full bridge driver for motor control applications realized in Multipower-BCD
technology which combines isolated DMOS power transistors with CMOS and Bipolar circuits
on the same chip.
By using mixed technology it has been possible to optimize the logic circuitry and the
power stage to achieve the best possible performance. The DMOS output transistors can
operate at supply voltages up to 42V and efficiently at high switching speeds. All the
logic inputs are TTL, CMOS and mC compatible. Each channel (half-bridge) of the device is
controlled by a separate logic input, while a common enable controls both channels.
The I.C. is mounted in three different packages.
The above information from a web site Hqew.net,A professional electronic component trading
market and platform,If you are engaged in IC industry,Suggest you go to the web in search
of the information of you need material.Offer popular hot ic components model for example
lm358,lm317,ne555,lm324,lm339.
Subscribe to:
Posts (Atom)